My daughter purchased recently 3 small size posters - THANKFULLY they were small enough she did not have to reorder but the way they were shipped were extremely careless. Each time they came in a PAPER cardboard envelope that had a huge crease down the center like the post office bent it along its journey to fit a cubby or something.  She has a HUGE mailbox so it did not need to be folded to fit inside. The other thing issue is protection against extreme weather - our postal service comes late (sometimes after 6PM) so it sat all night in the mailbox during a heavy rainstorm.  I know the poster comes in a plastic liner but in the morning the envelope was so drenched on one entire side had the contents been just a inch larger it would have affected the poster.  And she had no idea it was in the mailbox..... but this is really not the point. Something like this should really be delivered UPS so it is left at your door - if this cannot happen then the packaging material needs to be a heavy duty plastic with some sort of non foldable insulation inside and even write DO NOT BEND - FOLD in large red lettering across the entire outside.  As well something non foldable should be placed inside to prevent it from being folded and creased.  I was really disappointed that this happened not just once but 3 times it came arrived looking identical - outside damaged and carelessly shipped.   She also purchased wrapping paper and while that was left at the front door the cardboard box was too pliable - it too had a huge crease in the middle like it had been folded in half or something heavy laid across the center of the cardboard.  What a shame!!!  When she pulled the paper out of the box her beautiful wrapping paper had large dent in the middle; leaving a giant fold/crease across the entire roll of paper when unrolled for use.  She had no time to reorder she just had to make the best of it - but it does reflect on Zazzle when things like this happen.  Again this should be mailed in a heavy duty cardboard box that cannot be bent or damaged in case something heavy lays on top of it and a do not bend/fragile sticker - anything - should be marked on the outside. Hope this can improve as she is leary to order these types of items again in the future - it did leave a bad impression.  As well I would think the cost of better shipping materials over flimsy ones outweighs the cost of re-shipping and production of duplicating orders.  ... View more

Would it be possible to have someone adjust this particular mockup (see example) for the stamps so that the wooden stamp is closer to the stamped design, and preferably a little larger? it could even overlap a corner of the stamped design, but it doesn't have to. Just please make it look like these two things are intentionally grouped together instead of randomly placed. Thanks! Cute Okapi Line Drawing Rubber Stamp by mscontrary ... View more

Can we rearrange the sections this way (or something similar), so that collections that are not events or occasions do not get lost in the abyss? Collection Class/Category - Event or Occasion - Business - Schooling - Art - Graphics - Backgrounds or Patterns - Comical - Politics  - Other Then under each of these sections, we have the type of collection (cross/sell, similar styles, etc.) Maybe something like this is already in the works, but if not, can we? Pretty please 🙏 ... View more

I think the Media sections could be enhanced and more useful to our customers with embedded links to the products featured. Thank you for considering, Sandra ... View more

When I enter "paper bowls" as a search term when transferring a design to another product, the database of Zazzle products doesn't return the new 7" paper bowls. Entering "bowl" or "bowls" only shows the chili and soup bowls. Entering "plate" or "plates" is the only way to see the paper bowls, and they're the last of the search results. Thank you! ... View more

I've needed to use this a bit lately as people want to know about shipping for Valentine's Day. I know this seems minor but it reads "contact our customer support." The "our", in my opinion, is misleading. It would be better to leave out the our or say "Zazzle's customer support."  I helps clarify that we are not Zazzle employees by showing we are a separate entity. -- I also think it's critical that when someone leaves a message for a designer that they are immediately shown they need to turn on email messaging, or given the option to turn it on right there if it is off. ... View more

The idea of a "to do list" in the back end of the store came to me this morning when sharing some of my products on social media.   I realized that I had more girl birthday cards than boys.  So I made a "mental note" to work on designing more boy themed cards.  Suddenly, the idea dawned on me that it would be good to have a "to do list" integrated into the back end of the store, so I won't forget these mental notes that I make for myself.   The list can even have a calendar attached where we can insert a date for completing a task with reminders when a deadline is approaching.   ... View more

I would like to see the automated titles of the wooden gift boxes with tile insets changed to "trinket boxes"  or some other appropriate name. They are much too big for a typical "gift box." If I was looking specifically for trinket boxes and jewelry boxes, I would never use the search term "gift box" to look for one. That's just my opinion. https://www.zazzle.com/blue_chrysocolla_mineral_stone_gift_box-246930890677369848?size=square_large&design.areas=%5Bsquare_large%5D&social=true ... View more

There is already a site wide first time buyers discount for 20%, but I think it would be really cool/fun to be able to offer my first time customers a discount code with a word that was specific to my store to use on social media and my website.  Just a totally frivolous and random wish list item for you to consider!   ... View more

Paper sheets are a popular product - used for all sorts of designs that don't lend themselves to existing products. The problem is that some of the paper options are bond-weight (foldable) and one is cardstock (the semi-gloss.) Customers do NOT understand this, and the descriptions don't make it clear, so we really need to be able to control the paper options so card designs can be restricted to semi-gloss, and foldable designs can be restricted to the bond-weight options. At the moment, the only way to control the paper choice is to choose "this size and media only" which restricts the options too much. We need to be able to restrict paper type independent of size, and we also need to be able to exclude one paper type (semi-gloss) for designs that are designed to be folded. ... View more

It would be really helpful to many designers, including myself, to add a rule of thirds grid line, perhaps as highlighted color overlay or in bold for many of the flattened products like invitations.  Or as many products as possible if it's possible.  Thanks for considering.  -LauraLee ... View more

Please add text layer options to the editor such as drop shadows and outlines.  I know it's probably a big ask, because it's such a necessity for really basic design that it seems it would have been added a long time ago, but if it's in the realm of possibility, please consider it. Not as urgent as the above, but would be nice as well: The same effects being made available for configurable shapes and additionally, a gradient overlay option that fades to transparent on one end. And speaking of configurable shapes, another improvement would be to add options to the basic line shape so that we can turn it to dashed or dotted lines.     ... View more

I just noticed passport holders are discontinued. Please find a way to bring these back. Your consideration is greatly appreciated. ... View more

There doesn’t seem to be a good way to remove a group of products from a collection — sometimes it works if you select “add to a collection” (the one they are currently in) — but then you have to go and check the collection to see if it really happened.  More steps then should be required, when the other would be really simple. Thank you. Vivian ... View more

Would love to see full bleed as an option for the kiss cut stickers.  Some sticker designs need to be full bleed for a professional product. Thanks. ... View more

like the Art of Wear, Le Galeriste is based out of Montreal, Quebec, Canada. https://www.legaleriste.com/en/products   ... View more

Hello!  It would be great if 1099 forms could be made available online, particularly for those of us that travel.  I work with other e-commerce platforms that do make your 1099 accessible through your creator account online and still maintain confidentiality etc. I would appreciate it if this could be considered! ... View more

As an example https://community.zazzle.com/t5/creator-news/cross-sell-cover-collection-images-search-pages-testing/ba-p/126845 Not everyone checks out creator news or refers to them when wondering how to 'do things' so it might be a good idea to have these also shared via the Tips and Ideas Forum. ... View more

It would be great to offer 12 x 12 or 8.5 x 11 cardstock, like the kind that people use for scrapbooking. This is so that Zazzle designers can add their designs to the larger cardstock than what is currently offered. ... View more