Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Submitted by
ohhhhilovethat
on
03-03-2022
10:14 AM
My daughter purchased recently 3 small size posters - THANKFULLY they were small enough she did not have to reorder but the way they were shipped were extremely careless. Each time they came in a PAPER cardboard envelope that had a huge crease down the center like the post office bent it along its journey to fit a cubby or something. She has a HUGE mailbox so it did not need to be folded to fit inside. The other thing issue is protection against extreme weather - our postal service comes late (sometimes after 6PM) so it sat all night in the mailbox during a heavy rainstorm. I know the poster comes in a plastic liner but in the morning the envelope was so drenched on one entire side had the contents been just a inch larger it would have affected the poster. And she had no idea it was in the mailbox..... but this is really not the point. Something like this should really be delivered UPS so it is left at your door - if this cannot happen then the packaging material needs to be a heavy duty plastic with some sort of non foldable insulation inside and even write DO NOT BEND - FOLD in large red lettering across the entire outside. As well something non foldable should be placed inside to prevent it from being folded and creased. I was really disappointed that this happened not just once but 3 times it came arrived looking identical - outside damaged and carelessly shipped. She also purchased wrapping paper and while that was left at the front door the cardboard box was too pliable - it too had a huge crease in the middle like it had been folded in half or something heavy laid across the center of the cardboard. What a shame!!! When she pulled the paper out of the box her beautiful wrapping paper had large dent in the middle; leaving a giant fold/crease across the entire roll of paper when unrolled for use. She had no time to reorder she just had to make the best of it - but it does reflect on Zazzle when things like this happen. Again this should be mailed in a heavy duty cardboard box that cannot be bent or damaged in case something heavy lays on top of it and a do not bend/fragile sticker - anything - should be marked on the outside. Hope this can improve as she is leary to order these types of items again in the future - it did leave a bad impression. As well I would think the cost of better shipping materials over flimsy ones outweighs the cost of re-shipping and production of duplicating orders.
... View more
Submitted by
Baylee
on
03-02-2022
11:15 PM
It would be cool to have table place cards sold in smaller packs (maybe 12-15 would be a good number?) so they could be preprinted to include the table numbers. Only the guests names would have to be done by hand. If it was a quantity that allowed for a few extras for each table, in case mistakes are made with names, that would be perfect. I think most round wedding tables seat 8-12?
... View more
Submitted by
Briar
on
03-02-2022
01:25 PM
Can Zazzle replace this product with a safer wall clock option? California Residents: Prop 65 Disclaimer WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
... View more
Submitted by
Sara_H
on
03-02-2022
01:11 PM
Keyboards are showing as a discontinued product line in back end, but in the Create Your Own drop down, they are there as an option under Electronics. Are they coming back or gone forever? Thanks!
... View more
Submitted by
WHS_Designs
on
03-02-2022
08:00 AM
As the medium and large trinket trays are of the same shape, please add 'This Shape Only' for the Merchandising Options. Going forward, it would also help if creators could select multiple merchandising options and not be constrained to the choices in the current drop down menu. Thank you, W.H.
... View more
Submitted by
James
on
03-02-2022
03:48 AM

Hi Creators,
We love being able to provide you with the latest trends and the best guidance we can offer, but of course, want to make sure we're doing this in a comprehensive and understandable way. We would love to hear your Feedback on the Wedding Guide, now that you have had a bit of time to ingest it. Please feel free to share your thoughts and suggestions with us.
We truly appreciate it. 👰
... View more
Submitted by
Brownielocks
on
03-01-2022
11:52 AM
I just wanted to send a shout-out Thanks to the guys who program the site for (1) making it a lot easier to move the categories around now. I moved mine monthly btw. (2) Easier to make fabric now. Having said that, I am not thrilled with the layering issue where if I want to remove something, I have to bring it to the front layer first. Kind of picky.
... View more
Submitted by
Ms_Contrary
on
03-01-2022
10:18 AM
Would it be possible to have someone adjust this particular mockup (see example) for the stamps so that the wooden stamp is closer to the stamped design, and preferably a little larger? it could even overlap a corner of the stamped design, but it doesn't have to. Just please make it look like these two things are intentionally grouped together instead of randomly placed. Thanks! Cute Okapi Line Drawing Rubber Stamp by mscontrary
... View more
Submitted by
Deb
on
02-28-2022
05:49 PM
Would you like to continue from the last saved design you created 5 months ago? you created a year ago? you created 9 months ago ? Stop Please! This is So irritating Please put a small time limit on this -
... View more
Submitted by
Deb
on
02-28-2022
05:31 PM
Please PLEASE can we have some sort of reference to let us know if a cancelled order was re-ordered? Trying to go through to see if a person has reordered by cross reference is tedious and difficult - ALSO would Really be nice to have some sort of key as to the type of cancellation ie: cancelled or declined or returned? Maybe even a date so we could see if they cancelled Before or After they got their product. And While we are on the subject.. would really be nice if there was a limit to how long ago the order was that they can cancel.. like a cut off of say 60 days or ?? Not a year I have had cancellations from almost a year ago - this is no longer a cancellation IMHO I just downloaded my Feb earnings and took a look on my spreadsheet. I had 154 cancellations amounting to $1178.79 in just cancellations alone for Feb.. that's crazy .. anyone else getting high numbers besides me? I don't know how many of these re-ordered, if any.. too many to try to cross reference.. which is why I asked my initial request of having some way to see in our backend if a customer re-orders ..
... View more
Submitted by
shellifitz
on
02-28-2022
06:20 AM
In the old forums there were several threads discussing how people will buy one ivitation with the intention of using it as a digital invite or to mass produce and print their own. Well I don't sell that many invitations (so far) so I didn't jump in to those conversations. However over the past weeks I have an example where I know this is why one single invitation I designed is going to be used this way. I was contacted by a shopper a couple of weeks ago through my own email addy asking me if this specific invitation was offered as a digital download. I informed the person that it was not and they thanked me. Then nothing happened until this morning when that exact invite sold one copy to a person whoses name matches the one that emailed me asking about it. So, okay I got a sale of one invite but I am pretty sure it was not so she could sample it and come back for a bulk order. Anyway I just wanted to mention it. Hopefully this kind of thing only happens rarely.
... View more
Submitted by
tkgoforth
on
02-28-2022
05:39 AM
Could we have a permanent "replace product" button that does not need to go through approval? Fine Art America allows an ability to replace the image if necessary, without changing any other information. This is helpful for those of us who have made some errors with templates that may confuse people, or have not "locked" their image, or do not want to allow customizations.
... View more
Submitted by
igiftcenter
on
02-27-2022
05:34 PM
1. it would be really cool to have an insitu with a business person holding a business card towards the viewer with the focus on the business card. It's a fairly common mock up template I see all the time and it's really effective. As an alternative view their could be a less formal / casual business personal holding the business card. Going one step further (not sure this can be accomplished maybe have 5 or 6 popular professions displayed: a nurse holding a medical business card, a teacher, an office professional (that could work for any white collar job) etc. 2. For business card perspective it would be really useful for a buyer to see what their business card design would look like on all business card sizes at once for perspective and showing the difference between sizes side by side with content on them... their content. For example: lets put a prompt or button to "show this on all sizes" This would display their finalized design (or the original template) on a standard size, Euro size, Might size, mini size and square side by side... sort of the way we display transfer this design to
... View more
Submitted by
shellifitz
on
02-27-2022
12:34 PM
I was just trying to transfer some of my old award ribbon designs that were good sellers to the spools of 3" grosgrain ribbon. My idea was to rotate the text and tile it, thinking they could cut them to make several diy ribbone awards; but I can't get the text to tile in a way where they line up correctly to make that possible. So the question part is what are the chances of Z finding another maker for a similar product or maybe Zazzle becoming the maker? This would be the best idea because then I could just transfer all my designs to the new product. The suggestion part is for the design tool tech team. Could we get an easy way to tile text when we have enabled it to the be read from top to bottom instead of left to right? I was able to tile it but I when I rotated the text template on the new ribbon I could not get the spacing of the text right to make it usable. I hope this makes sense... and thanks in advance!
... View more
Submitted by
Mecpublications
on
02-27-2022
12:33 AM
These are changes just to change stuff. If it's not broke, why "fix" it. I won't be able to find replies to this. I don't even know where this post is or how I got here. What a freaking mess. Why?
... View more
Submitted by
Cat
on
02-25-2022
12:46 PM
Sorry to beat a dead horse here, I know this decision has been made, but this is bothering me. Maybe this could be reworded somehow? If you must refer to me as "the creator", could you at least not capitalize it? I mostly just think it looks silly and ridiculous, but I think there are some religious communities that might be offended.
... View more
Submitted by
WHS_Designs
on
02-25-2022
12:09 PM
It would be cool if we could have font attributes like bold italics underline strikethrough, etc., enabled in the text fields of the Zazzle design tool, in the same way that that I have done so in the body of this message. The additional (and more advanced) abilities to - (dynamically) add shadows and knockout to text, - adjust text size, - as well as adjust leading within multiple paragraphs of the same text field would be nice, too. Thank you for your consideration! W.H.
... View more
Submitted by
MasterpieceCafe
on
02-25-2022
10:21 AM
I would love the option of changing pricing on individual products (including different style/shapes) in one place. Allowing us, for example, to choose a new price or percent for a classic mug (or combo, or two-tone, etc.) across all stores or in one specific store. Selecting products 96 or 204 at a time is cumbersome. Plus many products are not differentiated to sort properly. For example different shaped/style ornaments are all lumped together but have different prices. I have very specific pricing goals for each product, but if there is a global new base price trying to hunt down that specific product across all stores is hard and time consuming. Or if I just want to change my pricing strategy for a product. If we had one place that said "Change all of my men's value t-shirts to 12.9% in xyz store" then I could update everything swiftly . Thanks for considering.
... View more
Submitted by
A_New_View
on
02-25-2022
08:58 AM
I don't know if this is already an option, but I think it would be a great idea for Zazzle to give the consumer the option to purchase an entire wedding suite (or other collection) at a discounted price. Just a thought.
... View more
Submitted by
Cat
on
02-24-2022
01:22 PM
I've been designing a lot of envelopes recently and have a few suggestions/requests. First, it would be really helpful if there were customizable envelopes available for all the size cards that Zazzle offers. The two requests I get most frequently are for envelopes for 3.5x5 inch cards (not sure what size that is) and size A9 - for cards designed on 8.5x5.5 inch paper (cardstock) sheets. Second, would it be possible to get a product view that included the front as well as both back views (open and closed) of the envelope? Often, most of the design is on the inside flap, but if I choose that view, then customers can't tell whether the design has a pre-printed return address on the back flap, or a pre-printed mail-to address on the front. Thanks for considering my suggestions!
... View more